Toyota has skilled many generational redesigns in its type over time. As well as, a security improve to the three-method-shoulder-and-waist-harness that we use at this time was launched because the automaker’s commonplace seat belt within the late Seventies. Relying on the years and type of your Toyota, the next instructions could also be fairly totally different. Nonetheless, the understanding of the method must be fairly related.
Toyota Seat Belt Replace Instructions
Find the place the highest shoulder harness retainer bolts to the higher inside panel. Some Toyotas could have an uncovered bolt on the harness retainer, whereas others might have a plastic snap-on cowl (often the colour of the inside) that must be pried off with a screwdriver to disclose the retaining bolt(s). Remove the quilt, if relevant, after which take away the retaining bolt.
Find the underside anchor level of the shoulder harness. This may be the purpose at which the process turns into broadly totally different for various Toyota type. Some could have harness anchors bolted on the ground of the inside, on the surface fringe of the seat. Some could require inside door panels to be eliminated. Some might require the carpet to be lifted, which will be accomplished by remove the underside door jamb kick-plate after which lifting the carpet. Others could even require remove the seat to entry the anchor retaining bolts beneath the seat on both aspect of the seatbelt connections. Check with the restore handbook on your particular type and 12 months of Toyota to comply with the right process to take away the anchor of the shoulder harness. As soon as the bottom of the anchor is uncovered, the retaining bolt(s) are fairly seen and removing of them is identical as for the highest of the harness. For some excessive-line type, resembling Camrys, there might also be a wire connection to the anchor base of the harness for computerized retraction. These could have electrical button connectors or be hardwired on to the retraction module. If mandatory, disconnect or reduce the wires, leaving sufficient room to rewire to the brand new harness anchor.
Find body bolts if both or each anchor factors of the seatbelt are retained by a bolt from below the automotive. Remove the bolts by holding the bolt head with a hand wrench, and use the ratchet and socket to take away the retaining nut.
Find the anchor on the within of the seat. Once more, this may occasionally require remove the 4 bolts holding the seat in place. Remove the seatbelt anchor retaining bolts after which carry the anchor upward from the floorboard barely. Many seatbelt anchors on Toyotas can have an electrical wire connection to the instrument panel info heart. That is what shuts off the seatbelt warning light on the sprint when the clip of the seatbelt is positioned into the anchor. Once more, disconnect or minimize after which strip the sting of the wire, leaving sufficient room to connect with the brand new seatbelt anchor.
Rewire the anchor electrical connections, utilizing the electrical butt connectors if crucial. Strip the plastic overlaying from the wires through the use of a wire-cutter/stripper/crimper instrument. Twist the uncovered wire to forestall it from fraying, after which insert it into one facet of the butt connector. Crimp the butt connector to retain the wire. Match the wire coloration connections.
Replace the anchor retaining bolts on either side, and the body bolts, if relevant. Tighten the bolts with a torque wrench and a socket based on the specs listed within the Toyota guide particular to your type.
Replace the shoulder harness retainer assembly. Torque the bolt(s) in keeping with the specs. Replace the remainder of the eliminated parts — door panel(s), seat(s), door jamb kick-plate(s) — that have been required to take away the seatbelt assembly. Lastly, check the operation of the seatbelt, ensuring the dashboard indicator light and, if relevant, the automated retraction module are working correctly.
[source ehow.com]
